Pilot Plants & Laboratory Equipment
Send Message +96892980524

General Core Flooding

The CF evaluates and optimizes oil recovery, based on different injection protocols and fluid, such as miscible and immiscible gas injection, surfactant injection, polymer injection and etc. This device tolerates a maximum pressure and temperature of 400 bar and 100 °C respectively, under unsteady state conditions at confining pressures up to 400 bar. One of the transfer vessels is a miniature type that can be used for rinsing the lines by filling them with toluene or other solvents. (E20: in addition, this miniature transfer vessel can be used for chemical or microbial flooding which the injected slug is small).

Extra Button
Educational General Core Flooding
CF-E10
Core Diameter 1.5 inch
Maximum Core Length 3.5 inch
Maximum Working Pressure 400 bar
Maximum Confining Pressure 400 bar
Maximum Working Temperature 100°C
Hassler Core Holder

 

Research General Core Flooding
CF-E20
Core Diameter 1.5 inch
Maximum Core Length 3.5 inch
Maximum Working Pressure 400 bar
Maximum Confining Pressure 400 bar
Maximum Working Temperature 100°C
Back Pressure Regulator 400 bar
Fluid Accumulators×3 500 CC
Hassler Core Holder

 

Industrial General Core Flooding
CF-E30
Core Diameter 1.5 inch
Maximum Core Length 3.5 inch
Maximum Working Pressure 600 bar
Maximum Confining Pressure 600 bar
Maximum Working Temperature 100°C
Back Pressure Regulator 400 bar
Fluid Accumulators×3 700 CC
Hassler Core Holder