Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Mud Circulation Structure
The device is used as a simulator of the mud circulation system. The drilling fluid circulating system is like a close loop electric circuit through which drilling fluid (i.e. mud) can travel from the surface to all the way downhole and back to its initial point (i.e. mud pit). The cuttings are then separated from the mud, which is then recycled.
| Educational Mud Circulation Structure MCS-R10 |
|
|---|---|
|
|
| Mud Circulation System | |
| Stainless Steel Resistant to Corrosion and Temperature Changes | |
| A Completely Natural Drilling Equipment Simulation | |
| Shale Shaker | |
| Height | 2.5 m |
Related products
-
LPLT Filter Press
Read moreThis apparatus measures drilling fluid and cement filtration at ambient conditions based on API procedures. It is also applicable to check the wall-building (filter cake) properties of drilling mud and cement slurries using filter paper. This is the most effective means of determining the filtration properties of drilling muds and cement slurries. The basic unit has a cell assembly constructed of Stainless Steel and includes the required screen and gaskets.
Request for quote -
Flash Point Measuring Device
Read moreThis device is used to determine the flashpoint value of petroleum products, which is the temperature point at which the sample vaporizes to another composition state in the air that can be ignited. At that moment, the flashpoint apparatus can determine and measure the vapor pressure change in which this occurs, also known as the lowest limit of flammability. Therefore, vapor concentration can be determined by temperature. It is widely used in railway, aviation, electrical power, oil industries, and scientific research departments, etc.
Request for quote -
Differential Sticking Tester
Read moreThis apparatus measures the stuck tendency coefficient of a drilling fluid. The probability of the occurrence of stuck pipe situation by drilling fluid, and also, the performance of an additive to the stuck solution could be measured by this setup. It takes into account both the stickiness and the cake-building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose, and fittings.
Request for quote -
Cloud Point Measuring Device
Read moreCold flow properties, such as Cloud Point and Pour Point, indicate how petroleum products behave at low temperatures. The test specimen is cooled at a specified rate and measured periodically. The highest temperature at which a cloud is first detected at the bottom of the test jar is recorded as the cloud point. The lowest temperature at which movement of the specimen is detected is recorded as the pour point. This device is designed to provide a highly accurate cloud of temperatures of petroleum products during cooling.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
