Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Penetration of Bituminous and Lubricating Grease Materials Measuring Device
This device is used to determine the penetration of pavement petroleum asphalt, modified asphalt, liquid petroleum asphalt, and emulsified asphalt. It is also suitable to set solid particles, powder, colloid, and raw-food materials such as cheese, glycine, butter, cream, and leavening. It can be widely used in highway engineering and other industrial fields.
| Educational Penetration of Bituminous and Lubricating Grease Materials Measuring Device PBM-P10 |
|
|---|---|
|
|
| Dimension Changeable According to Order | |
| Structure Material | Stainless Steel |
| Need Length | 45 mm |
| Aluminum Cup | 3 |
Related products
-
Sand Content Set
Read moreThe sand content kit is a simple, accurate, and inexpensive sieve analysis apparatus for determining the sand content of drilling muds. Sieve analysis is the preferred method for sand content determination because of the reliability of the test and the simplicity of the equipment. The volume of sand, including that of void spaces between grains, is usually measured and expressed as a percentage by the volume of the drilling fluid.
Request for quote -
Differential Sticking Tester
Read moreThis apparatus measures the stuck tendency coefficient of a drilling fluid. The probability of the occurrence of stuck pipe situation by drilling fluid, and also, the performance of an additive to the stuck solution could be measured by this setup. It takes into account both the stickiness and the cake-building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose, and fittings.
Request for quote -
Rheometer
Read moreVG meter measures the direct-indicating viscosity and the gel strength of the drilling fluid. It is a rotational cylinder and bob Rheometer. This instrument has 6 variable speeds. When the outer cylinder is full of drilling fluid, the inner cylinder rotates at a specific velocity. Hence, the torque which is exerted on the inner cylinder is measured accurately. Additionally, the viscosity is calculated based on the torque measurement.
Request for quote -
LPLT Filter Press
Read moreThis apparatus measures drilling fluid and cement filtration at ambient conditions based on API procedures. It is also applicable to check the wall-building (filter cake) properties of drilling mud and cement slurries using filter paper. This is the most effective means of determining the filtration properties of drilling muds and cement slurries. The basic unit has a cell assembly constructed of Stainless Steel and includes the required screen and gaskets.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
