Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Rheometer
VG meter measures the direct-indicating viscosity and the gel strength of the drilling fluid. It is a rotational cylinder and bob Rheometer. This instrument has 6 variable speeds. When the outer cylinder is full of drilling fluid, the inner cylinder rotates at a specific velocity. Hence, the torque which is exerted on the inner cylinder is measured accurately. Additionally, the viscosity is calculated based on the torque measurement.
| Educational Rheometer VSR-D10 |
|
|---|---|
 |
|
| Designed Based on API Recommended Practice 131 | |
| Working Temperature | Ambient |
| Working Pressure | Ambient |
| Variable Speeds 6 | Yes |
| Software for Data Analysis | Yes |
Related products
-
LPLT Filter Press
Read moreThis apparatus measures drilling fluid and cement filtration at ambient conditions based on API procedures. It is also applicable to check the wall-building (filter cake) properties of drilling mud and cement slurries using filter paper. This is the most effective means of determining the filtration properties of drilling muds and cement slurries. The basic unit has a cell assembly constructed of Stainless Steel and includes the required screen and gaskets.
Request for quote -
Ostwald’s Viscometer
Read moreOstwald viscometer, also known as U-tube viscometer or capillary viscometer is a device used to measure the viscosity of the liquid with a known density. The method of determining viscosity with this instrument consists of measuring the time for a known volume of the liquid (the volume contained between the marks A and B) to flow through the capillary under the influence of gravity. The instrument must first be calibrated with materials of known viscosity such as pure (deionized) water. Knowing the value of the viscosity of one liquid, one can calculate the viscosity of another liquid.
Request for quote -
Retort Kit
Read moreThis apparatus simply measures the percentage of oil, water, and solid volume of the drilling fluid. The sample is first heated up to 550°C and the vapor is passed through a condenser. The condensates are collected to measure the oil and water volume of drilling. Knowledge of oil, water, and solid content is fundamental for proper control of mud properties when considering oil/water ratios, rheology, density, filtration, and salinity. Knowledge of solids in drilling fluids is essential for proper evaluation and viscosity control.
Request for quote -
Marsh Funnel
Read moreThe marsh funnel is made of break-resistant plastic and has a fixed orifice with a specified diameter. A fixed mesh near the top across half the cone avoids the orifice from getting blocked by greater particles. The high-impact plastic measuring cup is designed specifically for use with a marsh funnel viscometer and has scales in cubic centimeters and fluid ounces. The marsh funnel viscosity is the ratio of the speed of the sample fluid as it passes through the orifice to the amount of force that is causing the fluid to flow. The marsh funnel viscosity is reported as the number of seconds required for 1000 cm³ of sample fluid to flow out of a full marsh funnel.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
