Our group is among the knowledge-based enterprise pioneers in petroleum industry.
LPLT Filter Press
This apparatus measures drilling fluid and cement filtration at ambient conditions based on API procedures. It is also applicable to check the wall-building (filter cake) properties of drilling mud and cement slurries using filter paper. This is the most effective means of determining the filtration properties of drilling muds and cement slurries. The basic unit has a cell assembly constructed of Stainless Steel and includes the required screen and gaskets.
| Educational LPLT Filter Press EP-D10 |
|
|---|---|
|
|
| Designed Based on API Recommended Practice 131 | |
| Stainless Steel Cells | |
| Filtration diameter | 9 cm |
| Working Pressure | 100 psi |
| Working Temperature | Ambient |
Related products
-
Drilling Simulator Structure
Read moreThis apparatus is a real-time portable simulator drilling and equipment operations. Well control and crane training to the rig. Moreover, it replicates some physical process or operation to some level of fidelity. Reliable drilling simulator software can replicate the drilling process with a close level of fidelity. Different simulations with different parameters can identify the optimal results.
Request for quote -
Flash Point Measuring Device
Read moreThis device is used to determine the flashpoint value of petroleum products, which is the temperature point at which the sample vaporizes to another composition state in the air that can be ignited. At that moment, the flashpoint apparatus can determine and measure the vapor pressure change in which this occurs, also known as the lowest limit of flammability. Therefore, vapor concentration can be determined by temperature. It is widely used in railway, aviation, electrical power, oil industries, and scientific research departments, etc.
Request for quote -
Differential Sticking Tester
Read moreThis apparatus measures the stuck tendency coefficient of a drilling fluid. The probability of the occurrence of stuck pipe situation by drilling fluid, and also, the performance of an additive to the stuck solution could be measured by this setup. It takes into account both the stickiness and the cake-building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose, and fittings.
Request for quote -
Ostwald’s Viscometer
Read moreOstwald viscometer, also known as U-tube viscometer or capillary viscometer is a device used to measure the viscosity of the liquid with a known density. The method of determining viscosity with this instrument consists of measuring the time for a known volume of the liquid (the volume contained between the marks A and B) to flow through the capillary under the influence of gravity. The instrument must first be calibrated with materials of known viscosity such as pure (deionized) water. Knowing the value of the viscosity of one liquid, one can calculate the viscosity of another liquid.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
