Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Differential Sticking Tester
This apparatus measures the stuck tendency coefficient of a drilling fluid. The probability of the occurrence of stuck pipe situation by drilling fluid, and also, the performance of an additive to the stuck solution could be measured by this setup. It takes into account both the stickiness and the cake-building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose, and fittings.
| Educational Differential Sticking Tester DST-D10 |
|
|---|---|
|
|
| Designed Based on API Recommended Practice 131 | |
| Accuracy | 0.01 |
| Working Temperature | Ambient |
| Working Pressure | 477 psi |
Related products
-
Marsh Funnel
Read moreThe marsh funnel is made of break-resistant plastic and has a fixed orifice with a specified diameter. A fixed mesh near the top across half the cone avoids the orifice from getting blocked by greater particles. The high-impact plastic measuring cup is designed specifically for use with a marsh funnel viscometer and has scales in cubic centimeters and fluid ounces. The marsh funnel viscosity is the ratio of the speed of the sample fluid as it passes through the orifice to the amount of force that is causing the fluid to flow. The marsh funnel viscosity is reported as the number of seconds required for 1000 cm³ of sample fluid to flow out of a full marsh funnel.
Request for quote -
Mud Balance
Read moreMud balance measures the density and specific gravity of drilling fluid and cement slurries. This apparatus is designed based on API-recommended standards. It is portable and can be carried to the rig to perform on-site measurements. It is one of the most sensitive and accurate field instruments available for determining the density or weight-per-unit-volume (specific gravity) of drilling fluids.
Request for quote -
Sand Content Set
Read moreThe sand content kit is a simple, accurate, and inexpensive sieve analysis apparatus for determining the sand content of drilling muds. Sieve analysis is the preferred method for sand content determination because of the reliability of the test and the simplicity of the equipment. The volume of sand, including that of void spaces between grains, is usually measured and expressed as a percentage by the volume of the drilling fluid.
Request for quote -
Aniline–Point Measuring Device
Read moreThis device is designed and manufactured under GB Determination of Aniline Point in petroleum products of testing aniline point of dark petroleum products. This device is used in oil and grease laboratory, oil and gas laboratory, petrochemical laboratory, refineries, standard laboratories, and research laboratories. Aniline point is used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
