Our group is among the knowledge-based enterprise pioneers in petroleum industry.
LPLT Filter Press
This apparatus measures drilling fluid and cement filtration at ambient conditions based on API procedures. It is also applicable to check the wall-building (filter cake) properties of drilling mud and cement slurries using filter paper. This is the most effective means of determining the filtration properties of drilling muds and cement slurries. The basic unit has a cell assembly constructed of Stainless Steel and includes the required screen and gaskets.
| Educational LPLT Filter Press EP-D10 |
|
|---|---|
|
|
| Designed Based on API Recommended Practice 131 | |
| Stainless Steel Cells | |
| Filtration diameter | 9 cm |
| Working Pressure | 100 psi |
| Working Temperature | Ambient |
Related products
-
Copper Corrosion Measuring Device
Read moreThe instrument is designed and made for the detection of copper corrosion from petroleum products by the copper strip tarnish test. It is suitable to determine the corrosiveness of gas, jet fuels, vehicle gasoline, natural gasoline, a hydrocarbon with Reid vapor Pressure, solvent oil, diesel oil, distillate oil, lubricating oil, and other petroleum products, to copper.
Request for quote -
Calcimeter Apparatus
Read moreThis apparatus measures the calcium carbonate (calcite) and magnesium carbonate (dolomite) content in drilling cuttings. The test is based on the reaction between calcite and dolomite with hydrochloric acid and consequent carbon dioxide emission. The formation of carbon dioxide increases the cell pressure which is measured by an accurate pressure gauge. The calcite to dolomite content of the unknown sample aids in determining which chemical treating program to implement. The entire test procedure requires 15 to 30 minutes for both calcite and dolomite determination.
Request for quote -
Cloud Point Measuring Device
Read moreCold flow properties, such as Cloud Point and Pour Point, indicate how petroleum products behave at low temperatures. The test specimen is cooled at a specified rate and measured periodically. The highest temperature at which a cloud is first detected at the bottom of the test jar is recorded as the cloud point. The lowest temperature at which movement of the specimen is detected is recorded as the pour point. This device is designed to provide a highly accurate cloud of temperatures of petroleum products during cooling.
Request for quote -
Differential Sticking Tester
Read moreThis apparatus measures the stuck tendency coefficient of a drilling fluid. The probability of the occurrence of stuck pipe situation by drilling fluid, and also, the performance of an additive to the stuck solution could be measured by this setup. It takes into account both the stickiness and the cake-building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose, and fittings.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
