Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Helium Porosimeter
The Helium gas Porosimeter determines the sample’s (1 inch or 1.5-inch diameter) grain and pore volume via an isothermal helium expansion and works based on Boyle’s and Charles’ law. Porosity is usually expressed as a percentage of the core plug’s total volume. The device tolerates an injection pressure of up to 10 bar (higher pressure is available upon request). Each sample matrix cup is interchangeable and is provided with stainless steel billets for calibration.
| Educational Helium Permeameter PO-R10 |
|
|---|---|
 |
|
| Standard Set of Calibration | |
| Porosity Range | 1-40% |
| Maximum Core Length | 3 inch |
| Maximum Injection Pressure | 10 bar |
| Research Helium Permeameter PO-R20 |
|
|---|---|
|
|
| Standard Set of Calibration | |
| Permeability Range | 0.5 – 40% |
| Maximum Core Length | 3.5 inch |
| Maximum Injection Pressure | 10 bar |
| Industrial Helium Permeameter PO-R30 |
|
|---|---|
 |
|
| Standard Billets for Calibration | |
| Standard Check Plugs with Known Porosity | |
| Porosity Range | 0.2 – 50% |
| Maximum Core Length | 3.5 inch |
| Maximum Injection Pressure | 10 bar |
Related products
-
Liquid Permeability
Read moreThe liquid permeability device determines the absolute permeability of the plug-sized cores at ambient temperature using liquid (commonly used: water). In addition, this apparatus tolerates a confining pressure of up to 400 bar and is able to take into account the effect of upper layers on the permeability. This device is specifically designed to teach students the principles of liquid permeability efficiently.
Request for quote -
Saturator and Gravimetric Porosimeter
Read moreSeveral methods have been developed to measure the porosity and pore volume of a sample. One method is called the fluid renaturation method. In this method, a clean and dried sample is weighted, saturated with a liquid of known density in a desiccator, and then reweighed. The weight change divided by the density of the fluid result in the pore volume.
Request for quote -
Dean Stark-Extractor
Read moreThe Dean-Stark apparatus is a piece of laboratory glassware used in synthetic chemistry to collect water (or occasionally other liquid) from a reactor. It is used in combination with a reflux condenser and a batch reactor for continuous removal of the water that is produced during a chemical reaction performed at reflux temperature. The dean stark extractor can also be used to determine the fluid saturation of core samples.
Request for quote -
Electrical Properties Apparatus
Read moreThe electrical properties device is an instrument for ambient electrical resistivity measurement using core plug samples. The manual version of the device includes an ambient electrical properties cell for 1.5-inch cores up to 4 inches in length, a resistivity meter, and a brine resistance measurement dip cell. In addition, properties such as Formation Factor, Resistivity Index, Saturation Exponent n, and Cementation Factor m can be determined.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
