Our group is among the knowledge-based enterprise pioneers in petroleum industry.
pH Meter
This apparatus is designed to measure the pH of drilling fluids. This is capable to use fluids with wide ranges of pH values. Fundamentally, a pH meter consists of a voltmeter attached to a pH-responsive electrode and a reference electrode. The pH-responsive electrode is usually glass, and the reference is usually a silver-silver chloride electrode. When the two electrodes are immersed in a solution, they act as a battery. The glass electrode develops an electric potential that is directly related to the hydrogen-ion activity in the solution, and the voltmeter measures the potential difference between the glass and reference electrodes.
| Educational PH Meter pH-D10 |
|
|---|---|
|
|
| Measurement Range | 0-14 |
| Accuracy | 0.01 |
| Working Temperature | Up to 100°C |
| Working Pressure | Ambient |
Related products
-
Flash Point Measuring Device
Read moreThis device is used to determine the flashpoint value of petroleum products, which is the temperature point at which the sample vaporizes to another composition state in the air that can be ignited. At that moment, the flashpoint apparatus can determine and measure the vapor pressure change in which this occurs, also known as the lowest limit of flammability. Therefore, vapor concentration can be determined by temperature. It is widely used in railway, aviation, electrical power, oil industries, and scientific research departments, etc.
Request for quote -
LPLT Filter Press
Read moreThis apparatus measures drilling fluid and cement filtration at ambient conditions based on API procedures. It is also applicable to check the wall-building (filter cake) properties of drilling mud and cement slurries using filter paper. This is the most effective means of determining the filtration properties of drilling muds and cement slurries. The basic unit has a cell assembly constructed of Stainless Steel and includes the required screen and gaskets.
Request for quote -
Aniline–Point Measuring Device
Read moreThis device is designed and manufactured under GB Determination of Aniline Point in petroleum products of testing aniline point of dark petroleum products. This device is used in oil and grease laboratory, oil and gas laboratory, petrochemical laboratory, refineries, standard laboratories, and research laboratories. Aniline point is used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures.
Request for quote -
Retort Kit
Read moreThis apparatus simply measures the percentage of oil, water, and solid volume of the drilling fluid. The sample is first heated up to 550°C and the vapor is passed through a condenser. The condensates are collected to measure the oil and water volume of drilling. Knowledge of oil, water, and solid content is fundamental for proper control of mud properties when considering oil/water ratios, rheology, density, filtration, and salinity. Knowledge of solids in drilling fluids is essential for proper evaluation and viscosity control.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
