Showing all 3 results

• 

  General Core Flooding

  The CF evaluates and optimizes oil recovery, based on different injection protocols and fluid, such as miscible and immiscible gas injection, surfactant injection, polymer injection and etc. This device tolerates a maximum pressure and temperature of 400 bar and 100 °C respectively, under unsteady state conditions at confining pressures up to 400 bar. One of the transfer vessels is a miniature type that can be used for rinsing the lines by filling them with toluene or other solvents. (E20: in addition, this miniature transfer vessel can be used for chemical or microbial flooding which the injected slug is small).

  Request for quote

  Read more
• 

  Benchtop Core Flooding

  The BCF-E10 evaluates and optimizes oil recovery, based on different injection protocols and fluid such as surfactant injection, polymer injection, etc… This device tolerates a maximum pressure of 400 bar for liquids under unsteady state conditions, at confining pressures of up to 400 bar. This device comprises one transfer vessel and a core holder, capable of different injection scenarios. In addition, the transfer vessel can be used for chemical or microbial flooding.

  Request for quote

  Read more
• 

  Sand Pack Core Flooding

  The sand pack system provides an alternative porous medium to perform EOR studies at reservoir conditions in terms of temperature and pressure. The sand pack is a tube, filled with calibrated sand with known grain geometry. This versatile device permits various EOR tests including water flooding, polymer injection, miscible and immiscible gas flooding. The sand pack system is an essential device for Petroleum Engineering laboratories as it does not require reservoir rock sample procurement & preparation.

  Request for quote

  Read more