Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Saturator and Gravimetric Porosimeter
Several methods have been developed to measure the porosity and pore volume of a sample. One method is called the fluid renaturation method. In this method, a clean and dried sample is weighted, saturated with a liquid of known density in a desiccator, and then reweighed. The weight change divided by the density of the fluid result in the pore volume.
| Saturator and Gravimetric Porosimeter GPO-R10 |
|
|---|---|
|
|
| Desiccator Equipped with Valve | |
| Vacuum Pump | |
| Digital Balance | |
| Desiccator Volume | 10 liters |
| Weighing Accuracy | 0.01 g |
Related products
-
Gas Permeameter
Read moreThe gas permeability device is designed in a way that measures the permeability of plug-sized core samples with gas (air, nitrogen, …) at room temperature conditions while applying an overburden pressure of up to 20 bar using the steady-state method. This device is designed to determine the slip factor and Klingenberg permeability of the core plug samples.
Request for quote -
Helium Porosimeter
Read moreThe Helium gas Porosimeter determines the sample’s (1 inch or 1.5-inch diameter) grain and pore volume via an isothermal helium expansion and works based on Boyle’s and Charles’ law. Porosity is usually expressed as a percentage of the core plug’s total volume. The device tolerates an injection pressure of up to 10 bar (higher pressure is available upon request). Each sample matrix cup is interchangeable and is provided with stainless steel billets for calibration.
Request for quote -
Helium Porosimeter at Confining Pressure
Read moreNormally, the porosity of the cores is measured without applying confining pressure on the samples. Although the confining pressure is not able to significantly affect the porosity value, it may lead to a huge deviation on the estimated value of the original oil in place. This device measures the porosity of the core samples while under confining pressure. This equipment can be used for grain density measurement at net confining stress. Moreover, Porosity is usually expressed as a percentage of the core plugs’ total volume.
Request for quote -
Electrical Properties Apparatus
Read moreThe electrical properties device is an instrument for ambient electrical resistivity measurement using core plug samples. The manual version of the device includes an ambient electrical properties cell for 1.5-inch cores up to 4 inches in length, a resistivity meter, and a brine resistance measurement dip cell. In addition, properties such as Formation Factor, Resistivity Index, Saturation Exponent n, and Cementation Factor m can be determined.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
