Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Pendant Drop Contact Angle and IFT Measurement
Drop shape analysis (pendant drop method) is a convenient way to measure surface tension. In this method, video images of pendant drops are digitized to determine the interface loci, then measuring the IFT through the solution of the Young-Laplace equation. Wettability of the reservoir rock and interfacial tensions between the reservoir fluids play the most important role in the efficiency of oil recovery.
| Educational Pendant Drop Contact Angle and IFT Measurement CA-ES10 |
|
|---|---|
|
|
| IFT Range | 3-72 mN/m |
| Contact Angle Range | 5°-179° |
| Working Pressure | Ambient |
| Working Temperature | Ambient |
| Glass Visual Cell | |
| Research Pendant Drop Contact Angle and IFT Measurement CA-ES20 |
|
|---|---|
|
|
| IFT Range | 3-72 mN/m |
| Contact Angle Range | 5°-179° |
| Working Pressure | Ambient |
| Maximum Working Temperature | 50°C |
| Metal-Glass Visual Cell | |
Related products
-
Sand Pack Core Flooding
Read moreThe sand pack system provides an alternative porous medium to perform EOR studies at reservoir conditions in terms of temperature and pressure. The sand pack is a tube, filled with calibrated sand with known grain geometry. This versatile device permits various EOR tests including water flooding, polymer injection, miscible and immiscible gas flooding. The sand pack system is an essential device for Petroleum Engineering laboratories as it does not require reservoir rock sample procurement & preparation.
Request for quote -
Spinning Drop IFT Measurement
Read moreThe designed Spinning Drop device (SD-ES10) is able to measure ultralow interfacial tension down to 10-5-5 mN/m. Ultra-low interfacial tension is utilized by special types of chemicals results in high oil recovery through IFT reduction and wettability alteration. These results help operators to develop and optimize emulsions and micro-emulsions.
Request for quote -
Microbial Core Flooding
Read moreThe core flooding system is designed in a very flexible and contemporary way. Therefore, it can be employed in most of the upstream studies with appropriate modifications with special respect to MEOR core flooding experiments. Different types of experiments can be conducted using this device such as conventional fluid injection, soaking experiment for determining the wettability alteration capability of microbes and bacteria, adsorption test, tertiary oil recovery, and other experiments related to the injection of microorganisms into the core plugs.
Request for quote -
General Core Flooding
Read moreThe CF evaluates and optimizes oil recovery, based on different injection protocols and fluid, such as miscible and immiscible gas injection, surfactant injection, polymer injection and etc. This device tolerates a maximum pressure and temperature of 400 bar and 100 °C respectively, under unsteady state conditions at confining pressures up to 400 bar. One of the transfer vessels is a miniature type that can be used for rinsing the lines by filling them with toluene or other solvents. (E20: in addition, this miniature transfer vessel can be used for chemical or microbial flooding which the injected slug is small).
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
