Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Sand Content Set
The sand content kit is a simple, accurate, and inexpensive sieve analysis apparatus for determining the sand content of drilling muds. Sieve analysis is the preferred method for sand content determination because of the reliability of the test and the simplicity of the equipment. The volume of sand, including that of void spaces between grains, is usually measured and expressed as a percentage by the volume of the drilling fluid.
| Educational Sand Content Set SCS-D10 |
|
|---|---|
|
|
| Designed Based on API Recommended Practice 131 | |
| Sieve, 200 mesh, 75 mm, 2.5-inch Diameter | |
| Plastic Funnel | Yes |
| Working Pressure | Ambient |
| Working Temperature | Ambient |
Related products
-
Penetration of Bituminous and Lubricating Grease Materials Measuring Device
Read moreThis device is used to determine the penetration of pavement petroleum asphalt, modified asphalt, liquid petroleum asphalt, and emulsified asphalt. It is also suitable to set solid particles, powder, colloid, and raw-food materials such as cheese, glycine, butter, cream, and leavening. It can be widely used in highway engineering and other industrial fields.
Request for quote -
Differential Sticking Tester
Read moreThis apparatus measures the stuck tendency coefficient of a drilling fluid. The probability of the occurrence of stuck pipe situation by drilling fluid, and also, the performance of an additive to the stuck solution could be measured by this setup. It takes into account both the stickiness and the cake-building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose, and fittings.
Request for quote -
Marsh Funnel
Read moreThe marsh funnel is made of break-resistant plastic and has a fixed orifice with a specified diameter. A fixed mesh near the top across half the cone avoids the orifice from getting blocked by greater particles. The high-impact plastic measuring cup is designed specifically for use with a marsh funnel viscometer and has scales in cubic centimeters and fluid ounces. The marsh funnel viscosity is the ratio of the speed of the sample fluid as it passes through the orifice to the amount of force that is causing the fluid to flow. The marsh funnel viscosity is reported as the number of seconds required for 1000 cm³ of sample fluid to flow out of a full marsh funnel.
Request for quote -
Pour Point Measuring Device
Read morePour points expresses the lowest temperature of the sample which is kept in liquidity while cooled under certain standards. Pour point devices are generally used in labs that analyze oil produce (naphtha-biodiesel) while testing samples whether they are appropriate to the standards or not.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
