Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Differential Sticking Tester
This apparatus measures the stuck tendency coefficient of a drilling fluid. The probability of the occurrence of stuck pipe situation by drilling fluid, and also, the performance of an additive to the stuck solution could be measured by this setup. It takes into account both the stickiness and the cake-building capability of the drilling fluid. The Stuck Tendency Coefficient is determined by the Timed Filtrate Test. The unit can be pressurized by the CO2 regulator assembly or from any nitrogen source. If Nitrogen is to be used, the Sticking Tester must be fitted with a suitable Nitrogen regulator, gauges, relief valve, hose, and fittings.
| Educational Differential Sticking Tester DST-D10 |
|
|---|---|
|
|
| Designed Based on API Recommended Practice 131 | |
| Accuracy | 0.01 |
| Working Temperature | Ambient |
| Working Pressure | 477 psi |
Related products
-
Auto Calcimeter Apparatus
Read moreThe Calcimeter accurately and quickly determines if the scale build-up is composed of calcium carbonate. The calcite to dolomite content of the unknown sample aids in determining which chemical treating program to implement. This apparatus measures the calcite and dolomite content of drilling cuttings automatically. Pressure data is transmitted to the software, and analysis is performed by online software. Hastelloy cell is resistant to hydrochloric cell.
Request for quote -
Copper Corrosion Measuring Device
Read moreThe instrument is designed and made for the detection of copper corrosion from petroleum products by the copper strip tarnish test. It is suitable to determine the corrosiveness of gas, jet fuels, vehicle gasoline, natural gasoline, a hydrocarbon with Reid vapor Pressure, solvent oil, diesel oil, distillate oil, lubricating oil, and other petroleum products, to copper.
Request for quote -
Penetration of Bituminous and Lubricating Grease Materials Measuring Device
Read moreThis device is used to determine the penetration of pavement petroleum asphalt, modified asphalt, liquid petroleum asphalt, and emulsified asphalt. It is also suitable to set solid particles, powder, colloid, and raw-food materials such as cheese, glycine, butter, cream, and leavening. It can be widely used in highway engineering and other industrial fields.
Request for quote -
Marsh Funnel
Read moreThe marsh funnel is made of break-resistant plastic and has a fixed orifice with a specified diameter. A fixed mesh near the top across half the cone avoids the orifice from getting blocked by greater particles. The high-impact plastic measuring cup is designed specifically for use with a marsh funnel viscometer and has scales in cubic centimeters and fluid ounces. The marsh funnel viscosity is the ratio of the speed of the sample fluid as it passes through the orifice to the amount of force that is causing the fluid to flow. The marsh funnel viscosity is reported as the number of seconds required for 1000 cm³ of sample fluid to flow out of a full marsh funnel.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
