Our group is among the knowledge-based enterprise pioneers in petroleum industry.
Spinning Drop IFT Measurement
The designed Spinning Drop device (SD-ES10) is able to measure ultralow interfacial tension down to 10-5-5 mN/m. Ultra-low interfacial tension is utilized by special types of chemicals results in high oil recovery through IFT reduction and wettability alteration. These results help operators to develop and optimize emulsions and micro-emulsions.
| Educational Spinning Drop IFT Measurement SD-ES10 |
|
|---|---|
 |
|
| IFT Range | 10-5-5 nM/m |
| Working Pressure | Ambient |
| Working Temperature | Ambient |
| Maximum Cell Speed | 12000 rpm |
| Capillary Diameter | 0.105 inch (2.6 mm) |
Related products
-
HP-HT Pendant Drop IFT Measurement
Read moreThe pendant Drop Interfacial Tension system measures interfacial tension between liquid-gas and liquid-liquid interfaces using the pendant drop method as well as the contact angle between the liquid and solid interfaces at reservoir pressure and temperature of 400 bar and 100°C, respectively. This device utilizes two different manual pumps for the independent discharge of bulk fluid and drops fluid into the visual cell equipped with sapphire sight glasses. The device is also equipped with online image processing software that captures and analyses the images. The visual cell has external heaters placed inside the body of the cell to achieve homogenous heating.
Request for quote -
Pendant Drop Contact Angle and IFT Measurement
Read moreDrop shape analysis (pendant drop method) is a convenient way to measure surface tension. In this method, video images of pendant drops are digitized to determine the interface loci, then measuring the IFT through the solution of the Young-Laplace equation. Wettability of the reservoir rock and interfacial tensions between the reservoir fluids play the most important role in the efficiency of oil recovery.
Request for quote -
Microbial Core Flooding
Read moreThe core flooding system is designed in a very flexible and contemporary way. Therefore, it can be employed in most of the upstream studies with appropriate modifications with special respect to MEOR core flooding experiments. Different types of experiments can be conducted using this device such as conventional fluid injection, soaking experiment for determining the wettability alteration capability of microbes and bacteria, adsorption test, tertiary oil recovery, and other experiments related to the injection of microorganisms into the core plugs.
Request for quote -
Sand Pack Core Flooding
Read moreThe sand pack system provides an alternative porous medium to perform EOR studies at reservoir conditions in terms of temperature and pressure. The sand pack is a tube, filled with calibrated sand with known grain geometry. This versatile device permits various EOR tests including water flooding, polymer injection, miscible and immiscible gas flooding. The sand pack system is an essential device for Petroleum Engineering laboratories as it does not require reservoir rock sample procurement & preparation.
Request for quote
Know Us
The company provides new services based on state-of-art technologies, breaking into new markets, and eventually, stabilizing as a knowledge-based industrial group.
Read More
